switch - pt 4

Back | HomePart 1 | Part 2 | Part 3 | Part 4 | Part 5 | Chall 1 | Chall 2  | Chall 3 | Test

[Expand]

Configure commands. There are many commands which can be used in configure mode. These can be investigated with:

1

> enable

2

# config t

3

# (config) ?

4

# (config) arp ?

5

# (config) boot ?

6

# (config) cdp ?

7

# (config) clock ?

8

# (config) cns ?

9

# (config) define ?

10

# (config) dot1x ?

11

# (config) enable ?

12

# (config) enable password ?

13

# (config) errdisable ?

14

# (config) exception ?

15

# (config) file ?

16

# (config) hostname ?

17

# (config) interface ?

18

# (config) ip ?

19

# (config) line ?

20

# (config) logging ?

21

# (config) mac ?

22

# (config) mac-address-table ?

23

# (config) map-list ?

24

# (config) monitor ?

25

# (config) mrv ?

26

# (config) ntp ?

27

# (config) port-channel ?

28

# (config) privilege ?

29

# (config) rmon ?

30

# (config) rtr ?

31

# (config) scheduler ?

32

# (config) service ?

33

# (config) shutdown ?

34

# (config) snmp-server ?

35

# (config) spanning-tree ?

36

# (config) stackmaker ?

37

# (config) system ?

38

# (config) tacacs-server ?

39

# (config) template ?

40

# (config) tftp-server ?

41

# (config) udld ?

42

# (config) username ?

43

# (config) vlan ?

44

# (config) vmps ?

45

# (config) vtp ?

Interface commands. There are many commands which can be used in interface mode. These can be investigated with:

1

> enable

2

# config t

3

# (config) int e0/1

4

# (config-if) arp ?

5

# (config-if) bandwidth ?

6

# (config-f) carrier-delay ?

7

# (config-if) cdp ?

8

# (config-if) channel-group ?

9

# (config-if) delay ?

10

# (config-if) description ?

11

# (config-if) dot1x ?

12

# (config-if) hold-queue ?

13

# (config-if) keepalive ?

14

# (config-if) load-interval ?

15

# (config-if) logging ?

16

# (config-if) mac-address ?

17

# (config-if) mls ?

18

# (config-if) mvr ?

19

# (config-if) ntp ?

20

# (config-if) pagp ?

21

# (config-if) random-detect ?

22

# (config-if) rmon ?

23

# (config-if) snmp ?

24

# (config-if) spanning-tree ?

25

# (config-if) speed ?

26

# (config-if) storm-control ?

27

# (config-if) switchport ?

28

# (config-if) timeout ?

29

# (config-if) transmit-interface ?

30

# (config-if) tx-ring-limit ?

31

# (config-if) udld ?

If you would like to register the switch emulator, or obtain the full version, please complete the following:

Purchase emulator